13836--DM-800  DMM-1000V AC/DC                 
13859--DM-800-C  DMM-1000V AC/DC (CALIB)        
13837--DM-810  DMM-TRMS 1000V AC/DC            
13860--DM-810-C  DMM-TRMS 1000V AC/DC (CALIB)        
13838--DM-820  DMM-TRMS 1000V AC/DC TEMP        
13861--DM-820-C  DMM-TRMS 1000V AC/DC TEMP(CALIB)    
13903--DM-860  DMM 500K COUNTS                 
13876--DM-860-C  DMM, 500K COUNTS-


Spec:
Voltage Measurement: 50.00, 500.0mV; 5.000, 50.00, 500.0, 1000V Amperage Measurement: 500.0, 5000µA; 50.00, 500.0mA; 5.000, 10.00A Resistance: 50.00, 500.0O; 5.000, 50.00, 500.0kO; 5.000, 50.00MO Capacitance: 50.00, 500.0nF; 5.000, 50.00, 500.0, 9999µF Frequency: 10Hz-125kHz Temperature: K type, -58°F to 1832°F (-50°C to 1000°C) Measurement Category: Cat IV, 600V; Cat III, 1000V

Description:
DM-800 features:

• Autoranging, 3-5/6-digit, 5000-count display for greater accuracy.
• Frequency and capacitance measurements plus diode and continuity tests standard.
• Data hold to capture measurements.
• RS-232 capable, may be connected to a PC for extended measurement capability with optional optically-isolated interface DMSC-8L, purchased separately.
• Low ohm range calibration, subtracts test lead resistance.
• Backlit display for easy viewing.
• DM-810 also features:
• True RMS for no-compromise accuracy.
• DM-820 also features:
• Record max, min, and max-min readings.
• Crest capture (5ms peak hold) max, min, and max-min readings.
• Relative offset display mode to see relative changes in measurements.
• Temperature measurement standard.
• Accessories included: (1) 9V battery, carrying case (DM-820, DM-810), bead temperature probe (DM-820 only, 400ºF/204ºC max), test leads.

Spec:
Voltage Measurement: 500.00mV; 5.0000, 50.000, 500.00, 1000.0V Amperage Measurement: 500.00, 5000.0µA; 50.000, 500.00mA, 5.0000, 10.000A Resistance: 500.00O; 5.0000, 50.000, 500.00kO; 5.0000, 50.000MO Capacitance: 50.00; 500.0nF; 5.000, 50.00, 500.0, 9999µF Frequency: 5Hz-200kHz sine wave; 5Hz-2MHz logic level square wave Temperature: K type, -58°F to 1832°F (-50°C to 1000°C) Measurement Category: Cat IV-600V, Cat III-1000V

Description:
DM-860 features:

• True RMS, 5-5/6-digit, 500,000-count display for greater accuracy.
•  Audible input alert helps avoid damage to meter.
• Record max, min, and max-min, and data hold.
• Crest capture (peak hold) max, min, and max-min readings.
• Relative offset display mode makes monitoring relative measurement changes simple.
• Performs frequency, temperature, and capacitance measurements, plus diode and continuity tests
• Measures temperatures up to 1832°F.
• Autoranging for convenient operation - and to save you time.
• 42-segment analog bar graph display capability makes it easy to view quick changes.
• Bright, backlit display is easy to read under any light condition.
•   RS-232 capable, may be connected to a PC for extended measurement capability with optional interface DMSC-9.
• Accessories included: (1) 9V battery, bead temperature probe (400°F/ 204°C max.), test leads, carrying case.