Signamax Connectivity Systems’ new stackable Gigabit Ethernet Power over Ethernet (PoE) Access Switch provides the capability to remotely power wireless access points, VoIP telephones, Powered Device (PD) media converters, and other devices that meet the IEEE 802.1af PoE standard.  These switches provide non-blocking performance for two 10/100/1000BaseT/TX Dual Media Gigabit Ethernet ports plus 24 10/100BaseT/TX PoE-equipped ports.  The 065-7726SPOE switch shares the same SNMP management package as its 065-7726S counterpart.  Both ring and star Gigabit backbone network architectures are possible with full automatic failover AND PoE extension to every workstation.  Enhanced Layer 3 look-ahead routing features and IEEE 802.1p Quality of Service / 802.1Q Tagged VLAN / IP Type of Service support make the Signamax 065-7726SPOE switch the cost-effective choice for creating an infrastructure capable of supporting Voice over IP telephony and wireless access.

KEY FEATURES

·    PoE, To Save Power Infrastructure Costs

·    2 Dual Media Ports for Flexible Fiber Connection

·    Isolated Group Feature for Secure Port Segregation      

·    Port Mirroring for Enhanced Network Monitoring

·    802.3ad Port Trunking with Automatic Link Fail-Over for Bandwidth Aggregation

·    QoS Supports 4 Priority Queues

·    Q-in-Q VLAN for Performance & Security

·    802.1x Access Control Improves Network Security

·    802.1D Compatible & 802.1w Rapid Spanning Tree

·    Broadcast/Multicast Storm Control

ORDERING INFORMATION

Signamax Connectivity Systems’ 065-7732A Gigabit Ethernet Access Switch provides two optional Gigabit Ethernet connections, and it is a fully functional SNMP-managed 24-port 10/100 switch as well. Two redundant, load-sharing, hot-swappable power supplies are standard equipment. The two optional Gigabit Ethernet ports permit creation of a Gigabit backbone network with 24 10/100 ports per switch for workstation and server connectivity.  Full SNMP management capabilities are included, with web browser, local terminal and Telnet remote terminal connection usable simultaneously with real time updating. It also communicates with network management systems such as HP OpenView™ via SNMP for enterprise-wide status display, statistical monitoring, and switch control.  Layer 3 look-ahead routing features and IEEE 802.1p Class of Service / 802.1Q Tagged VLAN support provide a complete package for convergent networks.

KEY FEATURES

·    Complete SNMP Management Support

·    Web-Based & Local Console Management      

·    Up to 2 Gigabit Ethernet Modular Interfaces

·    Non-Blocking Store-and-Forward Architecture

·    Full Wire-Speed Forwarding

·    Auto-Negotiates TX Speed & Duplex Modes

·    MAC Address Allow-Only Filtration

·    MAC-Based Trunking

·    IEEE 802.1p, 802.1Q QoS & VLAN Support

Signamax Connectivity Systems’ Model 065-7640AFSC and 065-7640AFSM Fast Ethernet Fiber Switches connect workstations and servers using fiber optic cable where Gigabit Ethernet connections are not desired. These non-blocking 24-port 100BaseFX Fast Ethernet switches have SNMP, web browser, local terminal connection and Telnet remote terminal management capabilities included, to build a fiber-based enterprise-level network at Fast Ethernet speeds. Model 065-7640AFSC provides 24 100BaseFX multimode fiber optic ports, typically used in Local Are Network (LAN) applications. Model 065-7640AFSM provides 24 100BaseFX singlemode fiber ports, for use in carrier network applications or in LANs where longer distances need to be spanned.

KEY FEATURES

·    Non-Blocking Switching Architecture, With 12 GB of Switching Bandwidth.

·    24 100BaseFX ports, Each Using SC Connectors.

·    MAC-Based Trunking, for High-Capacity Network Expansion

·    Complete SNMP & RMON Management Support, With Web-Based, Local Console, and Telnet Remote Console Access.

·    Supports IEEE 802.1p QoS and 802.1Q Tagged VLAN Standards.

·    Five-year Performance Warranty

Call for pricing 800-290-7752