Managed Media Converters Chassis System#
top
18-Bay Rack Mount Managed Media Converter Chassis System
10/100 To 100FX Managed Converters
10/100 To 100FX Single Fiber WDM Managed Converters
100FX Singlemode To Multimode Managed Converters
ATM Singlemode To Multimode
Managed Converters
1000LX To 1000SX/LX Managed Converters
18-Bay Rack Mount Managed Media Converter
Chassis System
Datasheet 18-Bay Managed Media Converter Rack Mount Chassis provides full SNMP
management capabilities for mission-critical installations. The
065-1480 provides 18 bays of space for all 065-14xx series Signamax
managed media converters in a standard 2U high enclosure. It also
includes the 065-1481 Management Module, which communicates with the
Signamax 065-14xx series media converters on the chassis’ backplane.
It provides full status information on the individual media
converter’s ports and allows the advanced management capabilities of
the 065-14xx series managed media converters to be switched on or off
remotely and individually. Diagnostic testing from a centralized
location avoids unnecessary technician dispatch. Alarm traps can be
sent to up to five remote IP addresses simultaneously, allowing
integration within a variety of Network Management Systems. In-band
and out-of-band management are supported by local and remote Telnet
console Command Line Interface (CLI), a web browser-based Graphical
User Interface (GUI), and a menu-driven interface.
Two fully redundant, load-sharing power supplies are standard, to
ensure continued availability of the media converters in the event of
a power supply failure. Either power supply is hot-swappable and can
be taken offline and removed from the unit while the media converters
are operating; the media converters themselves are also hot-swappable.
The 065-1480 also ships standard with three fully redundant,
load-sharing cooling fans to ensure reliable operation.
KEY
FEATURES
· Dual
Redundant Load-Sharing Power Supplies Standard
· Three
Redundant Fans for System Cooling Standard
· Menu-Driven Telnet or Local Console Interface
· Full
SNMP Management
· Local/Remote Loopback and LFS Invocation From Management Interface
· Web
Browser-Based GUI
· Command Line Interface via Telnet or Local Console Connection
· Supports 18 Managed Converters in 2U of Rack Space
· Intelligent Power Backplane
· Individually Fused Converter Mounting Bays
· Lifetime Performance Warranty
Part Number
|
Description
|
065-1480
|
18-Bay Rack Mount Managed Media Converter Chassis
|
065-1480DC
|
18-Bay Rack Mount Managed Media Converter Chassis, 48 V DC
|
065-1481
|
Spare SNMP Management Module
|
AC-1480
|
Spare AC Power Supply for 065-1480
|
DC-1480
|
Spare 48 V DC Power Supply for 065-1480
|
1480FAN
|
Spare Individual Fan Assembly for 065-1480 |
10/100 To 100FX Managed Converters
Managed Switching Media Converters are modular SNMP-managed media
converter cards available with a variety of interfaces to provide
copper-to-fiber conversion for mission-critical networks. They are
used with the 065-1480 Managed Media Converter Rack Mount Chassis to
enable network managers to remotely monitor the status of their entire
network via RJ-45 (in band) or RS-232 (out of band) connection to the
065-1481 series SNMP Management Module included with every Signamax
065-1480 chassis system. Up to eighteen managed media converters are
supported in a single 2U-high chassis. Equipped with Link Fault
Signaling (LFS) and Loopback Testing capabilities, they extend the
enterprise LAN configuration range up to 60 km while simultaneously
minimizing downtime expense and extending the lifespan and reach of
existing copper-based managed switches.
KEY
FEATURES
· Automatic MDI/MDI-X Crossover and NWay
Auto-Negotiation on the RJ-45 port
· Link Fault Signaling for Problem Awareness &
Automatic Rerouting with Spanning Tree Switches
· Loopback Test for Instant Connectivity
Confirmation
· Management Module with Pushbutton for Management
System Restart
· LED Status Indicators for Power, Link, Activity,
Collision, Full-Duplex
· “Hot-Swap” Slide-In Module Design
· SNMP Management Application Software (HP
OpenView and IBM/Tivoli NetView Capable)
· 3.3V Low Power Consumption Design
· Available with ST, SC, LC, MT-RJ, and VF-45
Multimode Connectors
· Available with SC and WDM Singlemode Connectors
· FCC Class A and CE approved
Part Number
|
Description
|
065-1400 |
10/100 to 100FX MM/ST, 2 km Managed Converter
|
065-1410
|
10/100 to 100FX MM/SC, 2 km Managed Converter
|
065-1420
|
10/100 to 100FX SM/SC, 30 km Managed Converter
|
065-1420ED
|
10/100 to 100FX SM/SC, 60 km Managed Converter
|
065-1470
|
10/100 to 100FX MM/VF-45, 2 km Managed Converter
|
065-1472
|
10/100 to 100FX MM/MT-RJ, 2 km Managed Converter
|
065-1474
|
10/100 to 100FX MM/LC, 2 km Managed Converter
|
Call for pricing 800-290-7752
10/100 To 100FX Single Fiber WDM Managed Converters
Managed Switching Media Converters are modular SNMP-managed media
converter cards available with a variety of interfaces to provide
copper-to-fiber conversion for mission-critical networks. They are
used with the 065-1480 Managed Media Converter Rack Mount Chassis to
enable network managers to remotely monitor the status of their entire
network via RJ-45 (in band) or RS-232 (out of band) connection to the
065-1481 series SNMP Management Module included with every Signamax
065-1480 chassis system. Up to eighteen managed media converters are
supported in a single 2U-high chassis. Equipped with Link Fault
Signaling (LFS) and Loopback Testing capabilities, they extend the
enterprise LAN configuration range up to 60 km while simultaneously
minimizing downtime expense and extending the lifespan and reach of
existing copper-based managed switches.
KEY
FEATURES
·
Automatic MDI/MDI-X Crossover and NWay
Auto-Negotiation on the RJ-45 port
Part Number
|
Description
|
10/100 To 100FX Single Fiber WDM Managed Converters
|
|
065-1476A
|
10/100 to 100FX SM/SC, 20 km Single Fiber WDM Managed Converter
|
065-1476B
|
10/100 to 100FX SM/SC, 20 km Single Fiber WDM Managed Converter
|
065-1476AED
|
10/100 to 100FX SM/SC, 30 km Single Fiber WDM Managed Converter
|
065-1476BED
|
10/100 to 100FX SM/SC, 30 km Single Fiber WDM Managed Converter
|
100FX Singlemode To Multimode Managed Converters
Singlemode to
Multimode Managed Media Converters are an enhancement to the Signamax
SNMP-managed media converter system. These card-based converters are
available with a variety of interfaces to provide singlemode-to-multimode
fiber conversion for mission-critical Fast Ethernet, Gigabit Ethernet,
and Asynchronous Transfer Mode (ATM) networks. A Gigabit Ethernet
singlemode-to-singlemode repeater model is also available by Special
Order. They are used with the 065-1480 Managed Media Converter Rack
Mount Chassis to enable network managers to remotely monitor the status
of their entire network via RJ-45 (in band) or RS-232 (out of band)
connection to the 065-1481 series SNMP Management Module included with
every Signamax 065-1480 chassis system. Up to eighteen managed media
converters are supported in a single 2U-high chassis. They extend the
enterprise LAN or carrier network range up to 60 km while simultaneously
minimizin
KEY
FEATURES
· Automatic MDI/MDI-X Crossover and NWay Auto-Negotiation on
the RJ-45 port
· Link Fault Signaling for Problem Awareness & Automatic
Rerouting with Spanning Tree Switches
· Loopback Test for Instant Connectivity Confirmation
· Management Module with Pushbutton for Management System
Restart
· LED Status Indicators for Power, Link, Activity,
Collision, Full-Duplex
· “Hot-Swap” Slide-In Module Design
· SNMP Management Application Software (HP OpenView and
IBM/Tivoli NetView Capable)
· 3.3V Low Power Consumption Design
· Available with ST, SC, LC, MT-RJ, and VF-45 Multimode
Connectors
· Available with SC and WDM Singlemode Connectors
· FCC Class A and CE approved
Part Number
|
Description
|
100FX Singlemode To Multimode Managed Media Converters
|
|
065-1430
|
100FX SM/SC, 30 km to 100FX MM/ST, 2 km Managed Converter
|
065-1430ED
|
100FX SM/SC, 60 km to 100FX MM/ST, 2 km Managed Converter
|
065-1432
|
100FX SM/SC, 30 km to 100FX MM/SC, 2 km Managed Converter
|
065-1432ED
|
100FX SM/SC, 60 km to 100FX MM/SC, 2 km Managed Converter
|
Call for pricing 800-290-7752
ATM Singlemode To Multimode Managed Converters
Singlemode to
Multimode Managed Media Converters are an enhancement to the Signamax
SNMP-managed media converter system. These card-based converters are
available with a variety of interfaces to provide singlemode-to-multimode
fiber conversion for mission-critical Fast Ethernet, Gigabit Ethernet,
and Asynchronous Transfer Mode (ATM) networks. A Gigabit Ethernet
singlemode-to-singlemode repeater model is also available by Special
Order. They are used with the 065-1480 Managed Media Converter Rack
Mount Chassis to enable network managers to remotely monitor the status
of their entire network via RJ-45 (in band) or RS-232 (out of band)
connection to the 065-1481 series SNMP Management Module included with
every Signamax 065-1480 chassis system. Up to eighteen managed media
converters are supported in a single 2U-high chassis. They extend the
enterprise LAN or carrier network range up to 60 km while simultaneously
minimizin
KEY
FEATURES
· Automatic MDI/MDI-X Crossover and NWay Auto-Negotiation on
the RJ-45 port
· Link Fault Signaling for Problem Awareness & Automatic
Rerouting with Spanning Tree Switches
· Loopback Test for Instant Connectivity Confirmation
· Management Module with Pushbutton for Management System
Restart
· LED Status Indicators for Power, Link, Activity,
Collision, Full-Duplex
· “Hot-Swap” Slide-In Module Design
· SNMP Management Application Software (HP OpenView and
IBM/Tivoli NetView Capable)
· 3.3V Low Power Consumption Design
· Available with ST, SC, LC, MT-RJ, and VF-45 Multimode
Connectors
· Available with SC and WDM Singlemode Connectors
· FCC Class A and CE approved
Part Number
|
Description
|
ATM
Singlemode To Multimode Managed Media Converters
|
|
065-1490
|
155
Mpps ATM SM/SC, 20 km to 155 Mbps ATM MM/SC, 2 km Managed Converter
|
065-1490HS
|
622
Mpps ATM SM/SC, 20 km to 622 Mbps ATM MM/SC, 2 km Managed Converter
|
1000LX To 1000SX/LX Managed Converters
Singlemode to
Multimode Managed Media Converters are an enhancement to the Signamax
SNMP-managed media converter system. These card-based converters are
available with a variety of interfaces to provide singlemode-to-multimode
fiber conversion for mission-critical Fast Ethernet, Gigabit Ethernet,
and Asynchronous Transfer Mode (ATM) networks. A Gigabit Ethernet
singlemode-to-singlemode repeater model is also available by Special
Order. They are used with the 065-1480 Managed Media Converter Rack
Mount Chassis to enable network managers to remotely monitor the status
of their entire network via RJ-45 (in band) or RS-232 (out of band)
connection to the 065-1481 series SNMP Management Module included with
every Signamax 065-1480 chassis system. Up to eighteen managed media
converters are supported in a single 2U-high chassis. They extend the
enterprise LAN or carrier network range up to 60 km while simultaneously
minimizin
KEY
FEATURES
· Automatic MDI/MDI-X Crossover and NWay Auto-Negotiation on
the RJ-45 port
· Link Fault Signaling for Problem Awareness & Automatic
Rerouting with Spanning Tree Switches
· Loopback Test for Instant Connectivity Confirmation
· Management Module with Pushbutton for Management System
Restart
· LED Status Indicators for Power, Link, Activity,
Collision, Full-Duplex
· “Hot-Swap” Slide-In Module Design
· SNMP Management Application Software (HP OpenView and
IBM/Tivoli NetView Capable)
· 3.3V Low Power Consumption Design
· Available with ST, SC, LC, MT-RJ, and VF-45 Multimode
Connectors
· Available with SC and WDM Singlemode Connectors
· FCC Class A and CE approved
Part Number
|
Description
|
1000LX To 1000BaseSX/LX Managed Media Converters
|
|
065-1494
|
1000LX SM/SC, 10 km to 1000SX MM/SC, 2 km Managed Converter
|
065-1494ED
|
1000LX SM/SC, 20 km to 1000SX MM/SC, 2 km Managed Converter
|
065-1498XLD
|
1000LX SM/SC, 20 KM to 1000LX SM/SC 20 km Managed Converter
|
Call for pricing 800-290-7752