Unmanaged Media Converters
Pg2
10/100 To 100FX Single Fiber WDM Converters With LFS
10/100 To 100FX PoE Converters
10/100/1000 To 1000SX/LX Converters
Gigabit Ethernet Media Converters
100BaseTX To 100BaseFX Converters
Back to Pg1
10/100 To 100FX Single Fiber WDM Converters With LFS
Datasheet Signamax Connectivity Systems’ Switching Single Fiber Wave
Division Multiplexing (WDM) Media Converters with Link Fault
Signaling allow data normally carried over two strands of fiber
optic cable to be carried over a single strand of fiber optic
cable, utilizing two different light spectra to carry signals in
both directions simultaneously. This technology doubles the
capacity of a company's fiber optic network, allowing a carrier
or an enterprise business to minimize its operational costs by
eliminating or delaying the deployment of additional fiber optic
capacity. These converters are available in singlemode only, and
span distances of up to 40 kilometers (24.85 miles) with the
065-1176AEDLFS and 065-1176BEDLFS models.
Since WDM Switching Media Converters utilize two different light
spectra with one end of a circuit transmitting on the other ends
receive frequency (and vice versa), they must be used in A/B
pairs. A circuit utilizing these converters would therefore use
a single strand of singlemode fiber optic cable plus one each of
the 065-1176ALFS and 065-1176BLFS, or one each of the
065-1176AEDLFS and 065-1176BEDLFS and 065-1176BLFS, depending
upon the distance spanned. All Signamax WDM converters are
equipped with Link Fault Signaling to provide the means for an
SNMP-managed switch to recognize a failure on a fiber channel or
twisted-pair connection, enabling the switch to automatically
route to a backup path if the connected switch is equipped with
Spanning Tree Algorithm. Each WDM Media Converter provides a
10/100BaseT/TX auto-negotiating RJ-45 twisted-pair connector
port, and features store-and-forward switching architecture.
Auto-MDIX capability on the twisted-pair port is also provided
for convenient connections.
KEY FEATURES
· 10/100 Switch Built-In for Full and Half Duplex Operation on
Twisted
· Auto-Negotiation and Auto-MDIX on RJ-45 Connector
· SC Simplex WDM Connector
· LEDs for Functions, Links & Activity
· Store-and-Forward Architecture
· Singlemode, Single Fiber Spans Up To 40 Km
· Lifetime Performance Warranty
ORDERING INFORMATION
Part Number
|
Description
|
065-1176ALFS
|
10/100 to 100FX, SM/SC, 20 km Single Fiber WDM Converter
Tx=1310 nm; Rx=1550 nm
|
065-1176BLFS |
10/100 to 100FX, SM/SC, 20 km Single Fiber WDM Converter
Tx=1550 nm; Rx=1310 nm
|
065-1176AEDLFS
|
10/100 to 100FX, SM/SC, 40 km Single Fiber WDM Converter
Tx=1310 nm; Rx=1550 nm
|
065-1176BEDLFS
|
10/100 to 100FX, SM/SC, 40 km Single Fiber WDM Converter
Tx=1550 nm; Rx=1310 nm
|
10/100 To 100FX PoE Converters
The Signamax 065-1050 series media converters are
10/100BaseT/TX to 100BaseFX Power over Ethernet (PoE)
devices that serve as Power Sourcing Equipment (PSE),
which allows the converter to provide power to IEEE
802.3af PoE standard-compliant Powered Devices (PDs)
using the twisted pair connection. This AC-powered
PoE media converter combines data received over a
fiber optic link with –48
The Signamax 065-1052 series media converters are
PoE 10/100BaseT/TX to 100BaseFX Powered Devices
supporting two types of media, 10/100BaseT/TX and
100BaseFX, for network connection. They are also
equipped with Link Fault Signaling (LFS), to
maintain link integrity and enable automatic
failover when used with Spanning Tree-equipped
switches.
KEY FEATURES
· PoE, to Save Power Infrastructure Costs
· Link Fault Signaling (LFS) with Far
End Fault
· DIP Switches for Setting PoE
Configuration
· IEEE 802.3af PoE PSE (Power Source
Equipment) Compatible (065-1050 series)
· Internal AC Power Supply (065-1050
series)
· Over-Current Protection &
Under-Current Detection (065-1050 series)
· Minimum Load Sensing (065-1050
series)
· Fault Protection Input (065-1050
series)
· IEEE 802.3af PoE PD (Powered
Device) compatible (065-1052 series)
Part Number
|
Description
|
10/100 To 100FX PoE Media Converters - (PSE)
Power Source Equipment
|
|
065-1050ST
|
10/100 to 100FX MM/ST, 2 km PSE PoE Converter
|
065-1050SC
|
10/100 to 100FX MM/SC, 2 km PSE PoE Converter
|
065-1050SM
|
10/100 to 100FX SM/SC, 15 km PSE PoE Converter
|
065-1050SMED
|
10/100 to 100FX SM/SC, 40 km PSE PoE Converter
|
065-1050SMXLD
|
10/100 to 100FX SM/SC, 75 km PSE PoE Converter
|
10/100 To 100FX PoE Media Converters - (PD)
Powered Devices
|
|
065-1052ST
|
10/100 to 100FX MM/ST, 2 km PD PoE Converter
|
065-1052SC
|
10/100 to 100FX MM/SC, 2 km PD PoE Converter
|
065-1052SM
|
10/100 to 100FX SM/SC, 15 km PD PoE Converter
|
065-1052SMED
|
10/100 to 100FX SM/SC, 40 km PD PoE Converter
|
065-1052SMXLD
|
10/100 to 100FX SM/SC, 75 km PD PoE Converter
|
10/100/1000 To 1000SX/LX Converters
Signamax Connectivity Systems’ 10/100/1000 Switching
Media Converter provides an intelligent solution for
long distance connections between legacy 10BaseT and
100BaseTX networks and the newer 1000Base Gigabit
Ethernet networks. The built-in 10/100/1000 switch
enables the fiber cable connection to operate at 1000
Mbps connected to either a 10BaseT, 100BaseTX, or a
1000BaseT network, while remaining completely
1000BaseSX standard-compliant for the fiber optic
connection. The fiber connection can also operate in
full duplex mode whether the RJ-45 port is connected
to a full duplex switch or a half duplex hub.
Each model 065-1196 Media Converter provides a
10/100/1000BaseT/TX auto-negotiating RJ-45
twisted-pair connector port featuring
store-and-forward switching architecture. Built-in
switch does the network segmentation to provide the
maximum fiber distance. Auto-MDIX capability on the
twisted-pair port allows convenient connection.
KEY FEATURES
·
· Auto-Negotiation RJ-45 Connector w/Auto-MDIX
· LEDs for Functions, Links & Activity
· Singlemode Spans up to 20 Km
· Wall or Chassis-mountable
· Lifetime Performance Warranty
ORDERING INFORMATION
Part Number
|
Description
|
Multimode Converters
|
|
065-1196 |
10/100/1000 to 1000SX MM/SC, 220m 62.5µ/550m 50µ
Converter
|
065-1196LX
|
10/100/1000 to 1000LX SM/SC, 10 km Converter
|
065-1196LXED
|
10/100/1000 to 1000LX SM/SC, 20 km Converter
|
DIN Rail Mounting Brackets
|
|
065-11DINMT
|
DIN Rail mounts bracket for 065-11xx series media
converters
|
Gigabit Ethernet Media Converters
Signamax Connectivity Systems’ Gigabit Ethernet Media Converters make
it simple to extend distances over multimode or singlemode fiber. They
are designed to expand the scope of your Gigabit Ethernet network
applications and are 100% compliant with Ethernet IEEE 802.3ab and
802.3z specifications. These converters maintain the same form factor
as other Signamax media converters, allowing use in the 065-1185
16-Bay Signamax Rack Mount Chassis. Twisted pair to fiber optic
converters for both multimode and singlemode fiber, multimode to
singlemode converters, and singlemode to singlemode extenders are
available.
KEY
FEATURES
· Converts Twisted-Pair to Fiber or Singlemode Fiber to Multimode Fiber
at Gigabit Speed
· Auto-MDIX
for Twisted-Pair
· LEDs
for Functions, Links & Activity
· Rack
Mount or Standalone Operation
· IEEE
802.3z & 802.3ab Compliant
· FCC
Class A & CE Approved
· Lifetime Performance Warranty
ORDERING INFORMATION
Part Number
|
Description
|
065-1194 |
1000BaseSX to 1000BaseLX, MM/SC to SM/SC, 10 km |
065-1194ED |
1000BaseSX to 1000BaseLX, MM/SC to SM/SC, 20 km |
065-1195 |
1000BaseT to 1000BaseSX, MM/SC, 220 m - 62.5/125, 550 m - 50/125 |
065-1197 |
1000BaseT to 1000BaseLX, Singlemode/SC, 10 km |
065-1197ED |
1000BaseT to 1000BaseLX, Singlemode/SC, 20 km |
065-1198XLD |
1000BaseLX to 1000BaseLX, Repeater, Singlemode/SC, 20 km |
DIN Rail Mounting Bracket
|
|
065-11DINMT |
DIN Rail mounts bracket for 065-11xx series media converters |
100BaseTX To 100BaseFX Converters
Signamax Connectivity Systems’ 100BaseTX to 100BaseFX Fiber
Optic Media Converters reduce cabling cost by providing
flexible, non-switched fiber optic solutions for Ethernet LANs
and WAN connectivity. They are also well-suited for packet
sniffer applications, since these devices do no CRC
filtering. Models are available for direct connection to
100BaseTX RJ-45 and 100BaseFX fiber optic Fast Ethernet
devices in a choice of connector and fiber optic cable types.
Each Media Converter is enclosed in a compact, strong metal
case and includes an external power supply for stand-alone
applications. They can also be installed without modification
in the Signamax 065-1185 Rack Mount Chassis system, which
features redundant power supplies for high reliability in
multiple converter installations.
KEY FEATURES
· Non-Switched Design Passes All Packets Transparently
· RJ-45 Connector with MDI-MDIX switch
· SC, ST, or SC Singlemode Models Available
· Singlemode Spans up to 20 Km
· IEEE 802.3u Compliant
· Lifetime Performance Warranty
ORDERING INFORMATION
Part Number
|
Description
|
Multimode Converters |
|
065-1100NS
|
100TX to 100FX MM/ST, 2 km Converter
|
065-1110NS
|
100TX to 100FX MM/SC, 2 km Converter
|
Singlemode Converter |
|
065-1120NS
|
100TX to 100FX SM/SC, 20 km Converter
|
DIN Rail Mounting Bracket
|
|
065-11DINMT
|
DIN Rail Mounts Bracket for 065-11xx Series Media Converters |
Call for pricing 800-290-7752