POP 'N' Work Tent Features

Tent Features

Main Menu

TWO QUICK TENSION FRAMES	Pop 'N' Work ground tents have just two pop-out tension frames. The frames can be popped from either inside or outside and setup is very quick. There are no loose parts to slow you down. Take down is even quicker.
TWO DOOR OPTION	The Pop 'N' Work line includes both one and two door ground tents. The two door are particularly useful for cabinet work, or on pole wrap tents or when connecting tents.
EFFICIENT POLE WRAP DESIGN	The Pop 'N' Work Pole Wrap Tent is the only tent designed specifically for that purpose. It provides a complete weather tight enclosure around the pole and an easy entrance adjacent to the pole. A second door on the back wall can make the tent even more efficient. The pole wrap tent is dual purpose and can be also used as a general purpose ground tent.
ROLL UP DOOR	Pop 'N' Work ground tent options include a roll up door that can be used as a canopy. this gives you added weather protection in many situations. A roll up door also makes it easy to slide the tent over cabinets.
CONNECTING TENTS	The roll up door or the pole wrap door can be used for connecting two tents and forming a larger enclosure. The easiest and quickest connection is the roll up door. Just position two tents door to door and wrap the roll up door around the front strut of each tent. The roll up door can have snap hooks to connect two tents. The tents re positioned door to door and each pole wrap door is extended and hooked to the other tent. With large tents, a special connector is used to provide a water drain-off between the two tents. The tents must have roll up doors.
QUICK PACK	Quick Pack is a standard feature on all Pop 'N' Work ground tents. Instead of a separate bag, one ground flap is designed for storage and carrying. Just collapse the tent and roll it into the flap. The flap has fastening snaps and carrying handles.
COMBINATION CANOPY TENT	The Pop 'N' Work Canopy Tent is designed so that it can be used as just a canopy or as a complete tent. If only sun or rain protection is needed the walls can be removed. When its cold and windy, the walls can be attached for complete weather protection. The tent can be purchased with or without walls.
EASY COVER REPLACEMENT	All Pop 'N' Work ground tents have an Unified Frame. This frame is completely independent of the over and can actually "stand on its own". This makes it very simple to replace worn-out ground tent covers. The result is very significant savings. The cost of replacing a cover is approximately 1/3 less than a new tent.
LOW MAINTENANCE FEATURES	In addition to the unified frame, Pop 'N' Work tents have a number of other design features that keep maintenance low and extend text life. A. All hinges are cold-rolled steel B. All fiberglass tension rods are glued and bolted at both ends s they cannot pull out. C. The urethane coating on our polyester tent fabric is double the standard coating. D. The minimum diameter for any fiberglass tension rod is .5"
SAFETY VENT-TENT	The Pop 'N' Work line includes Safety Vent ground tents. The tents are most commonly used over manholes. The large ventilation opening with Velcro closures provide plenty of cross ventilation at ground level. These vents effectively exhaust life threatening fumes.
EFFICIENT AERIAL TENTS	The Pop 'N' Work Aerial Strand Tent and Aerial bucket Tent both provide exceptionally efficient weather protection. The strand tent pops open quickly and there are no loose parts to assemble. It has clamps that fasten to either a strand or gate guard. The bucket tent was specifically designed for aerial buckets and provides a completely unobstructed work area. The tent has a separate bucket brackets that are first attached to the bucket. The tent can then be quickly attached to these brackets. Both tents are non conductive.
EXCEPTIONAL 4' X 4'	Even with its small base, the 4' x 4' x 6 1/2' Pop 'N' Work ground tent has exceptional freestanding stability. This stability exists even when the tent has two doors.
CUSTOM SIZES	With Pop 'N' Work ground tents, there are many size and shape possibilities. Seven standard tent sizes range from 4' x 4' to 10' x 12'. The design is adaptable to the other sizes, including both square and rectangular. The FX design makes large tents very sturdy and it is possible to build tents much larger that 10' x 12'. We can match your needs with a custom size and design.
MINIMUM LIGHT DISTORTION	To minimize light distortion, a combination of white and light gray material are used for standard Pop 'N' Work covers. A standard ground tent cover also includes orange safety stripes.
PED-PAL GROUND TENT	The Pop 'N' Work Ped-Pal Tent provide low cost weather protection for pedestals and other small work sites. It has a single popout tension frame for quick setup. The tent has a 5' height and is very compact and light.