OFI 200 Optical Fiber Identifier

The OFI 200 Optical Fiber Identifier is a low cost, hand-held instrument designed to detect optical signals without disrupting traffic. During maintenance, installations, rerouting or restorations, it’s often necessary to isolate a specific fiber. By simply clamping the OFI 200 onto a fiber, the unit will indicate if there is no signal, a 2 kHz tone, or traffic and show signal direction.
The OFI 200 is available in two models. The OFI 200B is recommended for 250 µm and ribbon "bare" fiber applications. The OFI 200C is recommended for up to 3 mm jacketed fiber. Both models are equipped with a unique two-position head design that can be configured to work with 250 µm, 900 µm, ribbon, or jacketed fiber in seconds, without tools or CAM adjustments.
When testing coated fibers, the slim design of the OFI 200 allows easier access on a splice tray where the amount of work space is limited. The clamping trigger is ergonomically designed to fit the natural motion of the operator’s hand. A high impact molded plastic case makes the OFI 200 suitable for use outside plant or in the central office. Powered by a single standard 9-Volt alkaline battery, the OFI 200 performs thousands of tests before battery replacement is necessary.

Features:

• Accepts 250 µm, 900 µm coated fiber, 3mm jacketed fiber cable, and ribbon fiber
• No head swapping or CAM adjustments
• Identifies light carrying fiber
• Low cost, easy to use
• Hand-held, 9V battery operated
• Low insertion loss - traffic remains uninterrupted
• Indicates 2 kHz Tone visually and audibly
• Indicates direction of traffic

SVA 1 Variable Optical Attenuator

Call 800-290-7752 for pricing and availibility

The SVA 1 Single-mode Variable Attenuator advances fiber optic field testing by offering superior performance in a low cost hand-held package. Utilizing a simplified, industry accepted attenuation technique, the innovative design of the SVA 1 offers superior resolution across the entire 60 dB dynamic range.

Intended for field testing during installation, new equipment turn-ups, or routine maintenance, the SVA 1 is a complete, easy to use attenuator. Its unique features allow bidirectional signal transmission with no loss penalty.

The SVA 1 is available with a variety of connectors and reflectance options to better than 60 dB. With only two adjustments, COARSE and FINE, the SVA 1 is simple to understand and operate. The SVA 1 is suited for all single-mode applications including Telco, LANs, WANs, Video, and CATV.

Features:

• 1310 and 1550 nm single-mode
• Lightweight
• Coarse and gine adjustments
• 60 dB dynamic range
• Better than 60 dB isolation  available
• FC, SC, or ST Style Outputs
• Low insertion loss

 

The VOA 5-MM (multimode) and VOA 5-SM (single-mode) are hand-held, field-rugged variable optical attenuators suited for a wide range of fiber link certification and production test applications. The VOA 5 can be operated under local control (front panel keypad) or from a PC via a serial link using the supplied PC software. The VOA 5 offers high bi-directional return loss and will maintain the set attenuation level when the unit is powered down.
The VOA 5 is powered by (2) AA alkaline batteries or an AC power adapter. A NiCad rechargeable battery pack is an option.
Each VOA 5 model /asp/includes: VOA 5 instrument, 2 AA alkaline batteries, 120/ 220 V AC power adapter, and carry case. Please specify optical connector and AC power cord type.

Features:

Applications:

AC Adapter:
Model                       Description
4050-00-0112            AC adapter 100-240VAC/12VDC,
                                select power cord