CableGlider® Plus Cable Puller
This model comes equipped with the same removable two-speed, 6,500 lbs (28,912 N) power pack and accessories as our STD model, but features a heavy-duty frame with an extra pivoting arm for added performance and versatility. In addition, the front frame height can easily be adjusted with pins.

Like all CableGlider models, the Plus is portable, sets up quickly, and comes completely self-contained: ready to work. As with the STD model, the CableGlider Plus features a self-tailing capstan for added stability, a pivoting arm, and a foot switch for operator convenience and safety. Accepts all diameter rope (self-tailing capstan accepts 5/8" (16 mm) to 7/8" (22 mm) rope only).

	Low Speed		High Speed
PULLING FORCE	lbs	kN	lbs	kN
Maximum	6,500	28.9	3,500	15.6
Continuous	4,000	17.8	2,000	8.9
PULLING SPEED	ft/min	m/min	ft/min	m/min
No Load	17.5	5.3	39.2	12.0
At 2,000 lbs (8.9 kN)	13.5	4.1	18.8	5.7
At 4,000 lbs (17.8 kN)	9.5	2.9	—	—
At 6,000 lbs (26.7 kN)	7.0	2.1	—	—
Power Requirements
08610650 08674300	115 VAC @ 10 Amps
08678025  08678050	220 VAC @ 5 Amps
PEAK POWER	1.9 HP (1.42 kW)
GENERATOR	4000 Watt Recommended, 2500 Watt Minimum