|
Capstans
|
|
|
| |
|
| |
| Slip Clutch
Capstans are designed to mount directly on a bayonet-style
winch drive shaft. A factory preset torque limiter prevents pulling
tensions from exceeding 600 pounds (2,670 N) ± 10% (60
lbs. or 267 N). If the preset load is reached, the capstan will "slip" and
discontinue rotating.
High-strength
aluminum and steel construction ensures product durability
and cable protection.
The capstan is
factory calibrated to 600 lbs. (2,670 N) but can be calibrated
to different loads from 300 to 1,000 lbs. (1,334 to 4,448 N).
The capstan
is designed for use with a 2 7/16" (62 mm) diameter, AT&T
specification bayonet style power take-off (PTO) shaft. |
Side Mounted Capstan
| Part
Number |
Diameter |
Flat
Width |
Max.
Cable O.D. |
| (in) |
(mm) |
(in) |
(mm) |
(in) |
(mm) |
|
30 |
762 |
4 |
102 |
.75 |
19 |
|
42 |
1,067 |
8 |
203 |
1.05 |
26.7 |
|
50 |
1,270 |
8 |
203 |
1.25 |
32.5 |
|
| |
© 2006 Net-Tech Distributing, Inc. All Rights Reserved. |
|
|
|
|
Copyright © 2008 - Net-Tech Distributing Inc.- www.nettechdi.com
|
|
