Optical Connectivity - Cable Assemblies,
Node Cable
All
Customized
to fit your needs.
Bend Insensitive Cable Assemblies
Single-mode Bend insensitive cable assemblies are manufactured with
precision depressed clad single-mode fiber enabling tight bend radii
and routing characteristics. Available in simplex, duplex, quad
(4-fiber) and octo (8-fiber) cable configurations.
Circular Premise Cable Assemblies
Higher fiber count Circular Premise Cable (CPC) assemblies provide
safe and cost effective installation for many applications.
Connectorized Jacketed Ribbon Assemblies
Connectorized jacketed ribbon assemblies which feature up to 12
fibers in a ribbon structure offering a higher density configuration
than conventional buffered designs.
Duplex Cable - Dual-Link Assemblies
Dual-link connectorized assemblies consist of 2.85mm outer jacket
with two PVC 900µm coated fibers, connectorized on the 900µm legs.
Standard length of this breakout is 1/2 meter.
Simplex Cable - SC Assemblies
SC cable assemblies are designed for the most advanced fiber optic
systems providing exceptional stability and low reflection
(single-mode). SC cable assemblies are well suited for high-density
applications.
Simplex Cable - ST Assemblies
The ST connector’s nonslip housing makes installation quick
and easy. The bayonet style coupling uses a convenient push-twist-and-lock
method for easy mounting and is keyed to ensure easy alignment.
Simplex Cable - FC Assemblies
The FC connector’s cylindrical nonslip surface allows for fast
and easy installation while the keyed, threaded metallic coupling
provides durable, reliable connections.
Simplex Cable - LC Assemblies
The LC connector reduces system cost by doubling the fiber density
in shelves and outlets without sacrificing performance. Assemblies
are manufactured and factory tested to provide the high performance
link needed in today’s high speed telephony, data, and broadband
networks.
Simplex Cable - MU Assemblies
MU assemblies are very useful in many high-density applications.
While the MU connector is 50% smaller than the SC connector, it
maintains high optical performance.
LightLink™ Fiber Receiver Service Cable with Armored
PE Jacket
FRSC cables are factory tested to meet stringent installation
performance demands. AFL cabling is designed to make splicing from an
optical node to a closure fast, easy and reliable.
LightLink™ Fiber Receiver Service Cable with Non-Armored
All-Dielectric UniFlex
Make splicing from an optical node to a closure fast, easy and
reliable. It significantly reduces splicing time and effort by
eliminating a fusion splice point.
Duplex Cable - MT-RJ Assemblies
MT-RJ assemblies are ideally suited for high-density applications,
doubling the fiber count in shelves and outlets. The MT-RJ is very
cost effective allowing the number of ports to be doubled without
doubling the cost of the electronics.
MTP® Cable Assemblies
MTP cable assemblies designed for high- density and multi-fiber
interconnect applications. MTP terminations are most commonly used in
fiber rich environments, where space is a premium.
Polarization Maintaining (PM) Assemblies
Advances in telecommunications and optical technology have led to
a demand for polariza-tion control in optical signal processing.
SC, FC and LC style jumpers with the optical polarization control
of PANDA®
fiber.
Loose Tube & Riser Rated Indoor / Outdoor
Cable Assemblies
High fiber count Loose Tube and Riser Rated Loose Tube cable
assemblies provide a safe and proven method of utilizing preterminated
connector technology for outside plant applications.
Quad Cable Assemblies
A wide variety of configurations for Quad fiber assemblies.
Duplex Cable - Zipcord Assemblies
The zipcord tight-buffered cordage contains two tubes of single-mode
fiber which are tight buffered with a 900µm jacket. This construction
is zipped apart to the desired length.
Loose Tube Fanout Kits
Loose tube fanout kits route 250µm fiber into 900µm tubes ready for
connectorization. Easily installed in minutes, these kits require
no special tools.
See Custom made cables here for more
