Copper Apparatus: Network Interface Devices
(Over 6 lines)
SNI-2012 12-Pair Network Interface Device
The SNI-2012 is a Network Interface Device (NID) designed for
12-pair applications. Constructed of a weather-resistant/high impact
thermoplastic alloy, the hinged cover design allows easy access while
the self-sealing individual entrance ports prevent water and insects
from entering. Twelve individual Keptel Line Modules provide the
interface at the demarcation point as specified in FCC Part 68
requirements, allowing testing at the subscriber’s location for each
individual feeder pair provided. The SNI-2012 features a separate and
secure telco compartment. The telco compartment will accommodate
lightning protection or multi-pair splice connectors. Door fasteners
include 3/8” hex or security style pin-in-hex.for broadband equipment.
Features:
• Compact 12-pair Network Interface
• Uses standard Keptel Line Modules
• Optional remote half ringer test electronics
• Hinged lockable Telco and Subscriber doors, easy Telco override
• Self-sealing individual entrance ports
• Optional custom logo
• Self-latching, hinged cover design allows easy access without
loose parts
• Weather-resistant/high impact thermoplastic alloy
SNI-2125 25-Pair Network Interface Device
The SNI-2125 is a compact Network Interface Device (NID) designed
for 25-pair indoor applications. Constructed of a thermoplastic alloy
and the highest quality components, the SNI-2125 is designed to
provide years of uninterrupted service. The SNI-2125 is provided with
a male 50-pin connector for the network connection (66-type punchdown
clips are optional) and press-fit wiring bridges featuring
multi-washer screws on the subscriber side. The SNI-2125 can be
stacked vertically for greater than 25-pair applications. The unit is
available without the subscriber wiring bridges for use as a 50-pin to
RJ-11 adapter or patch block.
Features:
• 25-pair network interface
• Optional remote half ringer electronics
• Rugged thermoplastic alloy housing
• 50-pin connector or optional 66-type punchdown on network sid
• Multi-washer screws on subsciber side
• Field replaceable wiring bridges
• Stack units vertically
SNI-8925 Multiline Network Interface Device
The SNI-8925 is a patented, ultra-compact, economical, Network
Interface Device (NID) designed for 25-pair multiline applications.
Twenty-five individual RJ-11 jacks provide the interface at the
demarcation point as specified in FCC Part 68 requirements, allowing
testing at the subscriber’s location for each individual feeder pair
provided. This line testing feature could reduce T&M charges on
maintenance calls, since the subscriber would now be able to test
their own individual lines to determine which side of demarc the fault
resides before calling for service.
Benefits
:• Mounts anywhere a 66M block would
• Compact 25-pair network interface
• Optional remote half ringer test electronics
• Rugged thermoplastic alloy housing
• Telco termination: 50-pin or AT&T 710 connector on back
• Subscriber termination: screw, IDC, 66-clip
• Mounts to 89B or 89D bracket
• Optional weatherable version for use in BET/NIDs
• UL® listed and patented (No. 4,932,051)/Telcordia™ tested
• Integral I/W strain relief for each individual pair
Features:
Multi-Washer Screws • Two screws with four washers each
allow the termination of up to four wires per screw
• Plastic 1/4" slotted hex heads prevent accidental casual contact
from the subscriber
• Optional weather resistant rubber boots cover RJ-11 jacks for
outdoor applications
• Integral I/W strain relief for each individual pair
Snap-Loc IDC
• Individual pairs can be terminated to the SNI-8925
without the use of hand tools
• Swinging cover makes the connection when closed by pushing
conductors into contacts
• The Snap-Lock IDC is for indoor use only
66 style clip
• Dual 66-clips allow termination of up to two wires
per clip
• Uses the same tool as traditional 66 style blocks
• Recommended for quick cross-connect capability when used with 66
blocks
• The 66 style clip is recommended for indoor use only
MPOP demarcation System
• Mounted on quick connect type racks
• 300-2400 pair applications requiring demarcation located at
minimum point of penetration
• Anywhere floor and wall space are a premium
• Preterminated stub cables on network side reduce installation time
by as much as 50%
• Each system 100% pretested to eliminate troubleshooting on the job
site
