Fiber Closures: Sealed Fiber Closures
Sealed Fiber Optic Splice Closures are designed to simplify splice
management. Quality engineering reduces the installation time,
training and complexity associated with fiber splicing in the field.
No heat, adhesives, drills or powered equipment for installation or
re-entry are required. These durable, easy to install closures will
increase productivity, reduce labor expenses and last the life of your
plant.
LG-50 Sealed Fiber Optic Splice Closure
The LG-50 is a versatile closure that was designed for splicing low
fiber counts, sheath repair or to provide an isolation gap on armored
cables. The LG-50 can be used in either an in-line or butt
configuration and is rated for 10 ft. waterhead.
Features:
• Two cable ports accommodate cables to 0.70" O.D. for splicing and
1.0” O.D. for grounding/bonding
• Individual cable retention clamps
• Removable, integral central splicing module
• Fully kitted with all parts to install cables
• Designed and tested to Telcordia™ GR-771 requirements
• Rural Utilities Service (RUS) Listed
LG-100 Sealed Fiber Optic Splice
The LG-100 is a sealed dome closure designed for small count fiber
splicing (< 36 single or 144 mass) in a butt configuration. Utilized
in aerial or underground environments where a sealed closure is
required. Ideal for express or ring applications. The LG-100 requires
no tools for re-entry.
Features:
• Supports loose tube, core tube, dielectric and armored cable
designs
• Installation and re-entry using common hand tools
• Fully sealed to protect fiber and splices ensuring longevity
• Fully kitted with all parts to install five cables
• Designed and tested to Telcordia™ GR-771 requirements
• Rural Utilities Service (RUS) Listed
LG-100 FTTx Sealed Fiber Optic Splice
The LG-100 FTTx is the fiber-to-the-subscriber version of the LG-100
sealed closure.
LG-200 Sealed Fiber Optic Splice Closure
The LG-200 is a sealed dome closure designed for medium count fiber
splicing (<96 single or 144 mass) in a butt configuration. Utilized in
aerial or underground environments where a sealed closure is required.
Ideal for express or ring applications. The LG-200 requires no tools
for re-entry.
LG-200 FTTx Sealed Fiber Optic Splice Closure
The LG-200 FTTx is the fiber-to-the-subscriber version of the LG-200
sealed closure.
LG-300 Sealed Fiber Optic Splice Closure
The LG-300 is a sealed dome closure designed for large count fiber
splicing (< 384 single or 1152 mass) in a butt configuration. Utilized
in aerial or underground environments where a sealed closure is
required. Ideal for express, ring or long haul applications. The
LG-300 requires no tools for re-entry.
Features:
• Supports loose tube, core tube, dielectric and armored cable
designs
• Installation and re-entry using common hand tools
• Fully sealed to protect fiber and splices ensuring longevity
• Fully kitted with all parts to install five cables (up to 7 cables
using dual port washers)
• Designed and tested to Telcordia™ GR-771 requirements
• Rural Utilities Service (RUS) Listed
LG-300 FTTx Sealed Fiber Optic Splice Closure
The LG-300 FTTx is the fiber-to-the-subscriber version of the LG-300
sealed closure.
LG-300XL Sealed Fiber Optic Splice Closure
The LG-300XL is a sealed dome closure designed for large count fiber
splicing (< 864 single or 2592 mass) in a butt configuration. Utilized
in aerial or underground environments where a sealed closure is
required. The LG-300 requires no tools for re-entry.
Features:
• Can accommodate up to 10 cables
• Supports loose tube, dielectric/armored cable and central core
cable designs
• Flanged O-ring and T-bolt V-band for increased protection at 20'
waterhead
• Oversized basket allows multiple configurations of slack storage
• Holds Pirelli™ 1152 fiber count cable at a diameter of 1.35"
Cable Sealing Grommet Kits for Sealed Fiber Optic Closures
To further enhance AFL’s Sealed Closure product, AFL
Telecommunications in conjunction with Mar-Dom Corporation, has
developed a new cable sealing grommet technology for the AFL Sealed
Fiber Optic Closures. This new multicentric® grommet technology
eliminates the need for the time consuming task of installing washers
and messy sealing tapes for cable entry and cable sealing.
