Copper Apparatus - Terminal Closures
Keptel® 1642 Termination Enclosures
The Keptel® 1642 termination enclosure can be outfitted with heavy
plated steel hangers designed to grip the support strand and prevent
rotation. Internal punch-out holes allow for wall or pole mounting.
Stainless steel lashing straps can be mounted through punch-outs for
pole, post or piling mounting.
Features:
• An alternative to the 116 or 104 closure
• Corrosion and weatherproof
• Pole or wall mountable
• Quarter-turn stainless steel cover fastener
• Eight grommeted cable entry/exit ports
• Houses 142 and 57 style protectors
• Accepts AFL Telecommunications, AT&T and Reliable terminal blocks
• Available with binding post, IDC or gas tube protection.
• Impact and chemical resistant engineered thermoplastic
Keptel® 1642XL
Termination Enclosure
Keptel® 1642 termination enclosure can be outfitted with heavy
plated steel hangers designed to grip the support strand and prevent
rotation. Internal punch-out holes allow for wall or pole mounting.
Stainless steel lashing straps can be mounted through punch-outs for
pole, post or piling mounting.
Features:
• An alternative to the 116 or 104 closure
• Corrosion and weatherproof
• Pole or wall mountable
• Quarter-turn stainless steel cover fastener
• Eight grommeted cable entry/exit ports
• Houses 142 and 57 style protectors
• Accepts AFL Telecommunications, AT&T and Reliable terminal blocks
• Impact and chemical resistant engineered thermoplastic
Keptel® 1642 IDC Terminal Enclosure
The Keptel 1642 IDC Terminal Enclosure is a copper 6-pair sealed
termination device. The 1642 enclosure can be used in aerial, pole or
wall mount applications. The product is equipped with six (6)
pre-installed individual IDC termination blocks mounted onto a single
common ground bus bracket. The bus bracket also allows common bonding
of ground wire, sheath armor and/or strand wire.
The 1642 IDC Terminal Enclosure is uniquely designed to withstand
the harsh environments, such as high moisture and coastal areas. The
product meets all Telcordia requirements stipulated in GR-975 for
sealing and GR-1195 for IDC Cross-Connect and Terminal Blocks.
Each individual IDC terminal block requires no stripping of the
copper wire insulation for terminating the wires. In addition each
module has two (2) ports for small gauge (22-24 AWG) wire terminations
and two (2) ports that accept large gauge (18-19 AWG) or small gauge
(22-24 AWG) wire for tip/ring connections. The ports are color coded
for easy tip/ring identification.
The 1642 also contains eight (8) individual grommeted entry/exit
ports for individual drop wire installations. In addition the terminal
has easy open and close access using a ¼ turn 216 can wrench. The
label inside the cover allows for line identification for each
individual IDC terminal block along with graphical installation
instructions.
Features:
• Individual gel-sealed IDC termination modules pre-installed
- 18 – 24 AWG copper wire termination
• Thermoplastic weatherproof enclosure
- UV resistant
- Impact resistant
- Chemical resistant
- Flame retardant
• Quarter-turn 216 locking fastener
• Eight individual entry/exit ports
• Aerial, wall or pole mount applications
• Optional strand hanger brackets
• UL listed
• Craft friendly design
Keptel® TA-200 Series
Demarcation Enclosures
The Keptel® TA-200 Series is a secure environmentally protected
two-pair wire terminal closure. Mounting hardware and terminal studs
are included. The TA-200 features grommeted openings and a provision
for security device.
Features:
• Corrosion and weatherproof
• Pole or wall mountable
• Secure hinged cover design
• Grommeted cable entry/exit ports
• Impact and chemical resistant engineered thermoplastic
• Available in multiple terminal configurations
