Condux 08760050-06 Slip Clutch Capstan 50" Diameter, 8" Flat Width,  600 lb. Rating
Slip Clutch Capstans from Condux are designed to mount
directly on a bayonet style winch drive shaft. A factory
preset torque limiter prevents pulling tensions from
exceeding 600 pounds (2,670 N) ± 10% (60 lbs or 267 N).
If the preset load is reached, the capstan will “slip” and
discontinue rotating.
High strength aluminum and steel construction ensures
product durability and cable protection.
The capstan is factory calibrated to 600 lbs (2,670 N) but
can be calibrated to different loads from 300 to 1,000 lbs.
(1,334 to 4,448 N).
The capstan is designed for use with a 27⁄16” (62 mm)
diameter, AT&T specification bayonet style power
take-off (PTO) shaft.

Standard Ratings:

Call 800-290-7752 For Special Ratings: 50-inch Capstan
Part Diameter Flat Width Max. Cable O.D. Rating
Number (in) (mm) (in) (mm) (in) (mm) (lbs) (N)
08760050-02 50 1270 8 203 1.25 32.5 200 890
08760050-03 50 1270 8 203 1.25 32.5 300 1335
08760050-04 50 1270 8 203 1.25 32.5 400 1780
08760050-05 50 1270 8 203 1.25 32.5 500 2225