|
Fire Stop Caulking and Silicones
|
|
| Fire Stop
Caulking | Mortars, Pillows, Putty |
Box and Cover Guards
| Metacaulk
Products |
 |
FIRESTOP INTUMESCENT
CAULK
Intumescent Caulk is water-based, single
component elastomeric
sealant intended for use as a firestop
system component. It
forms an economical yet durable, flexible
and watertight bond
with most construction materials. It is
applied independently
for “caulk and walk” systems
or over mineral wool or backer
rod to seal the openings where building
services such as pipes
and cables penetrate fire rated
assemblies. Will not crack or
crumble as the physical properties remain
stable over time. It
tools easily and cleans up with water.
May be applied by
caulking gun or trowel.
 |
 |
FIRESTOP
SILICONE
NSi FireStop Silicone is a primerless,
single component silicone
sealant. The sealant cures to a durable,
flexible silicone rubber
when exposed to atmospheric moisture. It
is designed for
economical use in joint and service
penetration firestop configurations
and forms a watertight bond with most
construction
materials. In most cases, no primer is
required.
NSi FireStop Silicone is designed to tool
easily. It will not
crack or crumble as its physical
properties remain stable over
time. It may be applied over a wide
temperature range, 0°F
to 120°F (-18°C to 50°C),
allowing it to be applied in any
season. It will remain flexible
indefinitely between temperatures
of -50°F and 300°F (-45°C and
149°C). May be
applied by caulking gun or trowel.
|
 |
FIRESTOP SILICONE
SLNSi
FireStop Silicone SL is a primerless,
single component selflevelling
silicone sealant. The sealant cures to a
durable, flexible
silicone rubber when exposed to
atmospheric moisture. It is
designed for economical use in joint and
service penetration
firestop configurations and forms a
watertight bond with most
construction materials. In most cases, no
primer is required.
NSi FireStop Silicone SL is designed to
self-level. No tooling
is required. It will not crack or crumble
as its physical
properties remain stable over time. It
may be applied over a
wide temperature range, 0°F to
120°F (-18°C to 50°C),
allowing it to be applied in any season.
It will remain flexible
indefinitely between temperatures of
-50°F and 300°F
(-45°C and 149°C). May be applied
by caulking gun or trowel.
|
|
|
|
|
Copyright © 2008 - Net-Tech Distributing Inc.- www.nettechdi.com
|
|