View Sensor Guard Here
Coaxial Protector
The success of cable based communications services is indisputable. A service provider can deliver the user a package of Television, on demand film, broadband internet access, telephone services and other products. The delivery medium is Coaxial cable from the nearest cabinet, whether in a residential or business district. The coaxial cable medium is ideal for transmission of the high frequency carriers required, enabling minimal interference/noise to be accumulated. While cable systems are efficient at delivering the services intended, they are vulnerable to lightning induced surge events like any other multi-grounded communications system.
When deployed at the Cable Termination unit, the Coaxial Protector provides unrivalled protection against direct or induced lightning based surge events for the clients home or business equipment.
Secondary surge protection at the "sensitive electronics" is a must to reduce damage from a near-by-lightning ground strike. The ensuing "Ground Potential Rise" conditions from a near-by bolt of lightning often leads to fault currents which will equalize across circuitry. Most vulnerable are electronic products, which under normal circumstances are connected as a fuse link, between the Multi-Grounded-Neutral and additional remote earth ground connections.
Developed and patented by ACM, Inc., The Sensorguard Coaxial Surge Arrestor device shunts fault currents around sensitive electronic circuits. Designed for electronic equipment having "Signal level" coaxial RF input jacks, such as Set-Top Equipment, Computer Tuners, TV's, & VCR's, etc.
Unique Product Benefits
• 100% Metallic Construction. No Solid State Circuitry to fail. Unique design principle uses the concept of "metallic particulate cohesion".
• Offers Protection at the Equipment where it is needed most, reducing the ILDT over long cable runs to a minimum.
• Product fails to the "Protected" mode as opposed to an open condition, giving the consumer the assurance of continuous protection.
• This robust protection product can be used over and over again, as opposed to the one-shot devices, which always fail to an "open" condition without warning or notice.
|
Clamping Voltage
Response Time
Current Suppression
Let-through Voltage
Efficiency
Insertion Loss
Return Loss
EMI Shielding |
17 volts
< 1 nano second
500 Amps, 12 Ohm loaded, (2 X 10 u sec.) **
101 volts, @ 6,100 volts input (2 X 10 u sec.) **
> 98 % (effective surge handling capability)
< 0.75 dB ---- 0 to 1000 Mhz.
> 19 dB
> 120 dB |
