Ground Safety Mats
Personnel safety mats are designed to protect against "touch potentials" under fault
conditions. Listed below are standard mat configurations, however mats can be customized by
utilizing the personnel safety mat numbering system. The following example is a safety mat that is
4' wide x 6' long made up of #6 solid copper conductor. Conductors are spaced every 4" and the mat
has a 1/0 AWG solid center wire.
Standard Mat Configurations
Mat Size 4' x 4', 4' x 6', 6' x 6', 6' x 8'
Wire Size #4, #6, #8 AWG Solid Conductor
Wire Type Pure copper or copper clad steel
(30% conductivity)
Mesh Size 2" square through 12" square in 2" increments
Center Wire Optional -
Comes with standard 6" overhang on both
sides of mat.
Conductors
Part No. |
Type |
|
4 |
Solid Copper |
|
6 |
Solid Copper |
|
6CW3D |
Copper Clad 30% Conductivity |
|
8 |
Solid Copper |
|
8CW3D |
Copper Clad 30% Conductivity |
|
Standard Mat Sizes
Part No. |
Width(ft.) |
Length(ft.) |
Conductor Size/Type |
Conductor Spacing |
Optional Center Wire |
Approx. Wt.(lbs.) |
PSM4666C1/0S |
4 |
6 |
6 |
6 |
1/0S |
10 |
PSM4644C2/0 |
4 |
6 |
4 |
4 |
2/0 |
23 |
PSM61066C4/0S |
6 |
10 |
6 |
6 |
4/0S |
26 |
Call 800-290-7752 for pricing
