Liquid Fiber Lubricant
Convenient Lubricant for Pushing or Pulling Small Cables with Spray or Wipe
Application
Polywater® FTTx Fiber Lubricant makes the installation of fiber drops easy. The lubricant is
concentrated, only a thin film is required for immediate tension reduction that
lasts even as the lubricant dries. Spray or wipe the cable or conduit. Quick
and easy to use without mess or excess lubricant.
Perfect for Fiber Optic Drops
Easy Application with Spray or Wipe
Lubricates with Very Thin Film, Performs After Drying
Non-Staining, Quick Clean-Up
Compatible with Common Cable Jackets – Including Polyethylene
Application and Usage
Directions
Polywater® FTTx Lubricant is easy to apply. It
can be sprayed into conduit or wiped onto cable, making the installation of
multiple drops quick and convenient. Use Polywater® FTTx to insure fast
installation without mess.
SPRAY
Inject 5 to 10 sprays directly into conduit just before pulling or pushing. For
larger conduit or longer pulls, spray additional lubricant onto the cable or
into the conduit if the tension increases.
WIPE
Wipe cable as it enters conduit or attach wipe to pulling line to prelubricate
conduit. One towel is sufficient for small cable and for installations or drops
under 200 feet. Use additional lubricant wipes on longer pulls or when tension
increases.
Polywater® FTTx Spray Lubricant remains effective with very thin,
molecular-level films, so it continues to lubricate even when it can not be
detected.
