spacer.png, 0 kB
No Sag
Main Menu
spacer.png, 0 kB
 spacer.png, 0 kB

Site Search

No Sag

Description NO-SAG is a free-flowing, powdered and easily dispersed biopolymer
Applications/Functions
  • Increase gel strength of the drilling fluid for better suspension of the drilled cuttings, coarse sand and gravel
  • Enhance carrying capacity for solids suspension at lower viscosity to further ensure flowability on longer length bores and backreams
  • Improves resistance to contamination when drilling in brackish and salt water environments
Advantages
  • Mixes easily into pre-hydrated bentonite based fluids
  • Enhances BORE-GEL system by increasing the suspension properties of the base drilling fluid with a minimal increase in viscosity
  • Small packaging for ease of handling and reduction of waste
Typical Properties
  • Appearance - Beige powder
  • Specific Gravity - 1.6
  • Bulk density (lb/ft3) - 45
  • pH (0.14% or 0.5 lb/bbl) - 7.1 - 7.4
Recommended Treatment Mix 2-4 pounds (1-2 bags) of NO-SAG per 300 gallons (0.8-1.6 kg/m3) of BORE-GEL drilling fluid slurry.

 

Amounts of NO-SAG added to a BORE-GEL Drilling Fluid Slurry
BORE-GEL NO-SAG
bags/300 gal lb/100 gal kg/m3 bags/300 gal lb/100 gal kg/m3
2-3 33-50 40-60 1-2 0.7-1.4 0.8-1.7
 

Packaging NO-SAG is packaged in a cardboard box containing 10 airtight sealed plastic bags. Each bag contains 2 pounds (0.91 kg).

spacer.png, 0 kB
spacer.png, 0 kB
 Copyright © 2007 - Net-Tech Distributing Inc.- www.nettechdi.com spacer.png, 0 kB