|
|
| MLP 1 - Basic Multimode Test Kit The MLP1 Test Kits are inexpensive solutions for testing multimode and single-mode systems. By joining the OPM 1 Optical Power Meter and the OLS 1 Optical Light Source, the MLP 1 is a great kit for beginners or network owners. Two versions of the MLP 1 Test Kit are available for testing Premises networks, LAN, and Gigabit Ethernet. The Test Kit includes a light source, power meter, protective rubber boots, adapter cap, 50 and 62.5 µm mandrels, MLP1 user's guide, and carry case. The MLP1-1S Test Kit includes the OPM1-2C Optical Power Meter and OLS1-1C Optical Light Source. The MLP1-2 Test Kit combines the OPM 1-2C Optical Power Meter and OLS1-2C Optical Light Source Features: Multimode and Single-mode Testing Loss Measurements at 850 nm and 1300 nm Certify 50 or 62.5 µm multimode fiber links for any 850 or 1300nm application, including Gigabit Ethernet (GBE) Includes 50 and 62.5 µm mandrels Field portable, battery operated N.I.S.T. Traceable Accessories: OLS 1 Adapter Model Description 4050-00-0111 90-264VAC/9VDC, select power cord
|
|
 SLP
4-6D SM test kit with Wave ID and Set ReferenceThe SLP 4-6D test kit combines the OPM 4-4D optical power meter and OLS 2-Dual LASER light source and is ideally suited for testing single-mode fiber optic networks. The OLS 2-Dual features 1310 nm and 1550 nm LASER output from a single output port and is easy to operate. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned. The OPM 4-4D offers Wave ID, automatic wavelength identification and switching, when used with the OLS 2-Dual. Multiple test Tone detection is provided for fiber identification. The OPM 4-4D stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4-4D or OLS 2-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4-4D optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4-4D and OLS 2-Dual are fully N.I.S.T. traceable. Features: Rugged, handheld, lightweight Designed for field use Certify single-mode links per TIA/EIA standards Wave ID - automatic wavelength identification and switching Dual Wave ID, single Wave ID, CW, and modulated Tone (on single-mode output) 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone Adjustable output Large LCD with Backlight Power measurements in dBm or µW; insertion loss in dB Reference power level storage AA alkaline, optional rechargeable NiMH battery pack or AC adapter Low battery indicator Cost-effective, easy to use N.I.S.T traceabl OLS 2-Dual Accessories: Model Description 4050-00-0119 90-264VAC/9VDC, AC Adapter, select power cord 8400-00-0072 FC Interface/SM/ MM 8400-00-0073 SC Interface/SM/ MM 8400-00-0074 ST Interface/SM/ MM
|
 |
Fiber Optic Loss Test Kits
|
|||||||
|
Copyright © 2007 - Net-Tech Distributing Inc.- www.nettechdi.com | |
Fiber
Optic Loss Test Kits
SMLP
4-4 SM/MM test kit with Wave ID and Set Reference
Call
for pricing 800-290-7752