 OLS
1 LED Light SourceThe OLS 1 LED light source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on fiber optic links when used with an optical power meter. The LED output is stabilized to ensure accurate test results per current TIA/EIA requirements. The OLS 1 is easy to operate with only a [Wavelength/ Power] switch, which selects optical wavelengths or disables unit. [Active Output], [Battery], and [External Power] indicators identify the currently enabled output port, battery charge status, and external power presence. Weighing only 0.65 lb, the OLS 1 is compact and convenient for field use. The OLS 1 operates over 60 hours from a typical 9V alkaline battery. An AC adapter is optional for extended use. The OLS 1 light source is fully N.I.S.T. traceable. All OLS 1 models come with 50 and 62.5µm mandrels, protective rubber boot, 9 volt battery, manual, and carry case. Features: Rugged, handheld, lightweight 850 and 1300 nm LED (multimode) light sources (660 nm available) Certify 50 or 62.5 µm multimode fiber links for any 850 or 1300 nm application, including Gigabit Ethernet (GBE) per TIA/EIA standards Free 50 µm and 62.5 µm mandrels Long battery life Cost-effective, easy to use N.I.S.T. Traceable Applications: Operating at 850 nm, the OLS 1-1C can be used for testing Ethernet, Gigabit Ethernet, Token Ring, and other multimode LAN systems. Operating at 660 nm, the OLS 1-1C can test 1000µ fiber and trace fibers with the visible 660 nm output. The OLS 1-2C operates at 850 and 1300 nm for use on Ethernet, Token Ring, and FDDI. The 1300 nm output can also be used to test short distance (up to 10 km) single-mode fiber links. Accessories: Model Description 4050-00-0111 AC Adapter, 90-264VAC/9VDC, select power cord 8100-03-0001 ST Interface/ MM 8100-03-0003 SC Interface/ MM 8100-03-0002 FC Interface/ MM 8100-02-0004 SMA Interface/ MM Call for Pricing and Availability 800-290-7752 |
 OLS
1-Dual LED Light Source with Wave IDThe OLS 1-Dual LED light source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on fiber optic links when used with an optical power meter. The LED output is stabilized to ensure accurate test results per current TIA/EIA requirements. The OLS 1-Dual features 850 nm and 1300 nm LED output from a single output port and is easy to operate with only a power button and a wavelength select button. This light source offers 3 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, and CW. [Active Output], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned. In addition to being powered by two AA alkaline batteries, the OLS 1-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OLS 1-Dual is fully N.I.S.T. traceable. All OLS 1-Dual models come with a carry case, AA batteries, protective rubber boot, and manual. Optical light sources and optical power meters can be packaged together as a kit. Features: Rugged, handheld, lightweight Dual wavelengths from a single port Certify 50 or 62.5 µm multimode fiber links for any 850 or 1300 nm application, including Gigabit Ethernet (GBE) per TIA/EIA standards Dual Wave ID, single Wave ID, and CW Free 50 µm and 62.5 µm mandrels AA alkaline, optional rechargeable NiMH battery pack or AC adapter Long battery life Low battery indicator Cost-effective, easy to use N.I.S.T. Traceable Applications: The 850 and 1300 nm output can be used for testing Gigabit Ethernet, Token Ring, FDDI, and other multimode LAN systems. The 1300 nm output can also be used to test short distance (up to 10 km) single-mode fiber links. Accessories: Model Description 4050-00-0119 AC Adapter, 90-264VAC/9VDC, select power cord OLS 1-Dual Accessories 8400-00-0072 FC Interface/SM/ MM 8400-00-0073 SC Interface/SM/ MM 8400-00-0074 ST Interface/SM/ MM Call for Pricing and Availability 800-290-7752 |
 OLS
2 Laser Light SourceThe OLS 2 laser source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS 2 may be used for fiber identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements. Three versions of the OLS 2 are available for measurements at 1310 nm, 1550 nm, 1625 nm. This light source offers 2 modes of operation: continuous wave (CW) and 2 kHz modulated Tone. [Laser Active], [Battery], and [External Power] indicators identify the enabled laser, battery charge status, and external power presence. The output port is equipped with FC, SC, or ST style connector. The OLS 2 laser sources operate on disposable batteries or AC adapter. The OLS 2 is fully N.I.S.T. traceable. All OLS 2 laser sources come with protective rubber boot, 9V battery, manual, and carry case. Features Rugged, handheld, lightweight Certify single-mode links per TIA/EIA standards CW or 2 kHz modulated Tone Long battery life Low battery indicator Adjustable output Cost-effective, easy to use N.I.S.T. Traceable Applications The OLS 2 may be substituted for terminal equipment in the central office or head-end to provide a stable output for loss measurements. For single-mode applications, such as Telecom or CATV, the OLS 2 may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310, 1550, or 1625 nm. In the modulation mode, the OLS 2 applies a 2 kHz tone into the fiber. This signal is detected by the OFI-200, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting Accessories: Model Description 4050-00-0111 AC Adapter, 90-264VAC/9VDC, select power cord 8400-00-0072 FC Interface/ SM 8400-00-0073 SC Interface/ SM 8400-00-0074 ST Interface/ SM Call for Pricing and Availability 800-290-7752 |
 OLS
2-Dual Laser Light Source with Wave IDThe OLS 2-Dual laser source is a cost-effective, rugged, handheld instrument designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS 2-Dual may be used for fiber identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements. The OLS 2-Dual features 1310 nm and 1550 nm (or 1550 nm and 1625 nm) LASER output from a single output port and is easy to operate. This light source offers 4 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, CW, and modulated Tone. [Active Output], [Tone], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned. In addition to being powered by two AA alkaline batteries, the OLS 2-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OLS 2-Dual is fully N.I.S.T. traceable. All OLS 2-Dual laser sources come with protective rubber boot, protective rubber boot, AA batteries, manual, and carry case. features Rugged, handheld, lightweight Dual wavelengths from a single port Certify single-mode links per TIA/EIA standards Dual Wave ID, single Wave ID, CW, and modulated Tone 270 Hz, 330 Hz, 1 kHz, and 2 kHz supported Tone (2 kHz default) AA alkaline, optional rechargeable NiMH battery pack or AC adapter Long battery life Low battery indicator Adjustable output Cost-effective, easy to use N.I.S.T. Traceable applications The OLS 2-Dual may be substituted for terminal equipment in the central office or head-end to provide a stable output for loss measurements. For single-mode applications, such as Telecom or CATV, the OLS 2-Dual may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 and 1550 nm. In the modulation Tone mode, the OLS 2-Dual generates a Tone signal into the fiber. This signal is detected by the OFI-200, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting. Accessories: Model Description 4050-00-0119 AC Adapter, 90-264VAC/9VDC, select power cord OLS 2-Dual Accessories 8400-00-0072 FC Interface/SM/ MM 8400-00-0073 SC Interface/SM/ MM 8400-00-0074 ST Interface/SM/ MM  Call
for pricing 800-290-7752 |