OPTICAL POWER METERS     LED LASER LIGHT SOURCES     FIBER OPTIC LOSS TEST KITS

OPM 1 - measures optical power in dBm

This portable optical power meter may be used to measure optical power in premises, telco, or broadband fiber optic networks. When used with an LED or laser light source, the OPM 1 can also measure the attenuation (insertion loss) of multimode or single-mode cables. With only two controls - ON/OFF and wavelength - the OPM 1 is our simplest to use optical power meter. Optical power in dBm and the calibration wavelength setting are displayed on an easy-to-read LCD display. The optical input port accepts Noyes thread-on style connector adapter caps. Adapter caps are required and must be ordered separately. The OPM 1 is fully N.I.S.T. traceable and runs on a standard 9-volt alkaline battery.

Features:
850, 1300, 1310, 1550nm
Premises (Ge) and broadband (InGaAs) models
Displays optical power (dBm)
Simplest to use optical power meter
N.I.S.T traceable

Call for Pricing and Availability 800-290-7752

OPM 4 - adds Wave ID and Set Reference The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable. All OPM 4 models come with a carry case, AA batteries, protective rubber boot, and manual. Optical light sources and optical power meters can be packaged together as a kit. Features: Rugged, handheld, lightweight Multimode or single-mode applications Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models Wave ID - automatic wavelength identification and switching Passive Optical Networks (PON) testing Dual Wavelength testing 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection Large LCD with Backlight Power measurements in dBm or µW; insertion loss in dB Reference power level storage AA alkaline, optional rechargeable NiMH battery pack Battery Gauge N.I.S.T traceable Call for Pricing and Availability 800-290-7752

OPM 5 - adds Wave ID and Data Storage The OPM 5 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 5 also measures insertion loss of multimode or single-mode cables. The OPM 5 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual, OLS 2 Dual, or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 5 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. Up to 500 records per wavelength of power or insertion loss measurements may be stored in internal non-volatile memory. Using the supplied Windows® compatible software and USB connection, test records may be transferred to a PC for storage, display, printing, and analysis. In addition to being powered by two AA alkaline, the OPM 5 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 5 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 5 is fully N.I.S.T. traceable. All OPM 5 models come with a carry case, USB cable, Windows® compatible software, AA batteries, protective rubber boot, and manual. Optical light sources and optical power meters can be packaged together as a kit. Features: Rugged, handheld, lightweight Designed for field use Multimode or single-mode applications Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models Wave ID - automatic wavelength identification and switching Passive Optical Networks (PON) testing Dual Wavelength testing 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection Large LCD with Backlight Power measurements in dBm or µW; insertion loss in dB Reference power level storage Up to 500 test records per wavelength storage and download USB port for download of stored records Free Windows® compatible software to view, print, and archive test records AA alkaline, optional rechargeable NiMH battery pack or AC adapter Battery Gauge N.I.S.T traceable Accessories: Model Description 4050-00-0119 AC Adapter, 90-264 VAC to 9 VDC, select power cord 6000-00-0024 Cable, USB-MINI B Call for pricing 800-290-7752